PUBLICATIONS

“The joy of discovery is certainly the liveliest that the mind of man can ever feel”

- Claude Bernard -

International Journal Publications

Sahith Reddy Madara, Swaroop Ramaswamy Pillai, Chithirai Pon Selvan, JensVan heirle, "Modelling of surface roughness in abrasive waterjet cutting of Kevlar 49 composite using artificial neural network", ELSEVIER Materials Today (SCOPUS INDEXED). March 2020. DOI: 10.1016/j.matpr.2020.02.868

 

Arulmani L, Shridharmurthy H N, Chithirai Pon Selvan M, Sahith Reddy Madara, “Hot Powder Forging Behavior Analysis of Sintered AISI 8740 PM Steels for Automotive Application”, ELSEVIER Materials Today (SCOPUS INDEXED). Feb 2020. DOI: 10.1016/j.matpr.2020.01.079

 Dr. P.S. Samuel Ratna Kumar, Prof. S. John Alexis, Sahith Reddy Madara, “Vibration – Impact study on AlMg4.5Mn reinforced Nanoclay Composites”. ELSEVIER Materials Today (SCOPUS INDEXED). Jan 2020, DOI: 10.1016/j.matpr.2020.01.096

Chithirai Pon Selvan, Swaroop Ramaswamy Pillai, Sahith Reddy Madara, Divya Midhunchakkaravarthy, "A Mathematical Modelling of Abrasive Waterjet Machining on Ti-6Al-4V using Neural Networks". ELSEVIER Materials Today (SCOPUS INDEXED). Jan 2020, DOI: 10.1016/j.matpr.2019.12.215

 Sahith Reddy Madara, Tarifa Mohammed Al Kaabi, Prof. Ilias Fernini, Dr. Antonios Manousakis, Dr. Muhammad Mubasshir Shaikh, Prof. Alim Rüstem Aslan, Prof. Emrah Kalemci, “Development of SHARJAH-SAT-1: An Improved X-ray Detector Onboard a 3U CubeSat" [11th European CubeSat Symposium 2019 – Collaboration with Luxembourg Space Agency and von Karman Institute for Fluid Dynamics] - September 2019

Link: https://cubesatsymposium.eu/index (Proceedings - PDF)

 Dr. Ishu Sharma, Sahith Reddy Madara, Prof. Pankaj Sharma, “Study of Tauc gap, optical density and penetration depth of vacuum evaporated Pb15Se85-xGex (x = 0, 3, 6 at. %) thin films supported by chemical band approach and physical parameters”. ELSEVIER Materials Today (SCOPUS INDEXED). Nov 2019.

DOI: 10.1016/j.matpr.2019.10.023

Bilal Shabandri, Sahith Reddy Madara, Piyush Maheshwari. (2020) “IoT-Based Smart Tree Management Solution for Green Cities”. In: Pattnaik P., Kumar R., Pal S. (eds) Internet of Things and Analytics for Agriculture, Volume 2. Studies in Big Data 67. pp. 181-199, SPRINGER Nature, Singapore.

DOI: https://doi.org/10.1007/978-981-15-0663-5_9

Swaroop Ramaswamy Pillai, Chithirai Pon Selvan, Sahith Reddy Madara, “Design of PID Control to Improve Efficiency of Suspension System in Electric Vehicles” [IEEE Explore (SCOPUS INDEXED) - International Conference on Sustainable Environment and Urban Infrastructure, Dubai, UAE] .

DOI: 10.1109/ICCIKE47802.2019.9004322

Swaroop Ramaswamy Pillai, Sahith Reddy Madara, Chithirai Pon Selvan, 2019. “Predication of Kerf width and Surface Roughness in Waterjet Cutting Using Neural Networks”. IOP Journal of Physics: Conference Series (SCOPUS INDEXED), Volume 1276, pp. 1-10, International Conference on Recent Advances in Fluid and Thermal Sciences, BITS PILANI, Dubai, UAE. DOI: 10.1088/1742-6596/1276/1/012011

 

Chithirai Pon Selvan, Swaroop Ramaswamy Pillai, Sahith Reddy Madara, Divya Midhunchakkaravarthy, 2019. “Investigation on Abrasive Waterjet Machining Conditions of Mild Steel using Artificial Neural Network”. ELSEVIER Materials Today (SCOPUS INDEXED), International Conference on Manufacturing, Material Science and Engineering, Hyderabad, Telangana, India. DOI: 10.1016/j.matpr.2019.06.757

 

Sahith Reddy Madara, Sarath Raj N.S, Jerrin Thadathil Varghese, and Chithirai Pon Selvan, 2019. "Experimental Investigations on Abrasive Waterjet Machining of Hybridized Kevlar With Jute Fiber Reinforced Epoxy Composite Using Taguchi & ANOVA Approach". IEEE Explore (SCOPUS INDEXED), IEEE ASET’19 - International Conference on Advanced Materials, Design and Manufacturing Conference, Dubai, UAE, pp. 1-9. DOI: 10.1109/ICASET.2019.8714323

Alim Rüstem Aslan, Ilias Fernini, Antonios Manousakis, Muhammad Mubasshir Shaikh, Sahith Reddy Madara, Muhammad Mubasshir Shaikh, Tarifa Al-Kaabi et al.,2019. “Space Technology Capacity Building in Support of SDG 2030 through CubeSat Sharjah-Sat-1”. IEEE Explore (SCOPUS INDEXED), RAST 2019: AIAA & IEEE 9th International Conference on Recent Advances in Space Technologies, Istanbul, Turkey. DOI: 10.1109/RAST.2019.8767863

Sahith Reddy Madara, Chithirai Pon Selvan, Swaroop Ramaswamy, January 2019. "Impact of Process Parameters on Surface Roughness of Hastelloy using Abrasive Waterjet Machining Technology". International Journal of Recent Technology and Engineering (IJRTE), (SCOPUS INDEXED), ISSN: 2277-3878, Volume-7, Issue-5S2, pp. 419 – 425, Available at: https://www.ijrte.org/download/volume-7-issue-5s2/

Chithirai Pon Selvan, Sahith Reddy Madara, Swaroop Ramaswamy Pillai, Ramesh Vandanapu, 2019. “In-Depth Evaluation of Process Variables in Abrasive Waterjet Cutting of Alumina Ceramics”. IEEE Explore (SCOPUS INDEXED), International Conference on Advanced Materials, Design and Manufacturing Conference, Dubai, UAE, pp. 1-4. DOI: 10.1109/ICASET.2019.8714504
 

Boo Hyun An, Bum Chul Park, Sahith Reddy Madara, Daniel Choi, et al., November 25-30, 2018. “Design of Microwave Absorption Structures Based on Magnetite Multi-Granule Nanocluster-Multiwall Carbon Nanotube Composite Materials”, A Meeting of the Materials Research Society, [Symposia: Carbon Nanotubes; Graphenes and Related Nanostructures], Boston, Massachusetts, USA. Available at: https://mrsfall2018.zerista.com/event/member/530902

 Sahith Reddy Madara, Sarath Raj. N. S, Chithirai Pon Selvan, 2018. "Review of research and developments in self-healing composite materials". IOP Series: Materials Science and Engineering, (SCOPUS INDEXED), International Conference on Recent Advance in Materials & Manufacturing Technologies, Dubai, UAE, Volume 346, pp. 1-16. DOI License: https://doi.org/10.1088/1757-899X/346/1/012011

Chithirai Pon Selvan; Sahith Reddy Madara; S S Sampath; Sarath Raj N S, 2018. "Effects of process parameters on depth of cut in Abrasive Waterjet Cutting of phosphate glass". IEEE Xplore, (SCOPUS INDEXED), International Conference on Advanced Materials, Design and Manufacturing, Dubai, UAE, pp.1-6. DOI: https://doi.org/10.1109/ICASET.2018.8376868

Chithirai Pon Selvan ; Sahith Reddy Madara ; Swaroop Ramaswamy Pillai ; Ramesh Vandanapu, 2018. "Solar hybrid vehicles for environmental protection". IEEE Xplore, (SCOPUS INDEXED), International Conference on Sustainable Environment and Urban Infrastructure, Dubai, UAE, pp. 1-6. DOI: https://doi.org/10.1109/ICASET.2018.8376761

 Santhosh Goud Sammeta; Sahith Reddy Madara, 2018. "Recent trends in RFID technologies and its impact on universities". IEEE Xplore, (SCOPUS INDEXED), International Conference on Innovations in Engineering Education, Abu-Dhabi, UAE, pp.1-6. DOI: http://doi.org/10.1109/ICASET.2018.8376922

 Sahith Reddy Madara; Piyush Maheshwari; Chithirai Pon Selvan, 2018. "Future of millennial generations: A review". IEEE Xplore, (SCOPUS INDEXED), International Conference on Innovations in Engineering Education, Dubai, UAE, pp. 1-4. DOI: https://doi.org/10.0.4.85/ICASET.2018.8376927

 Santhosh Goud Sammeta, Sahith Reddy Madara, 2018. "Impact of Information Technologies on Library Services in Educational Institutions". IEEE Explore. (SCOPUS INDEXED). International Conference on Infocom Technologies and Unmanned Systems (Trends and Future Directions) (ICTUS), pp. 662 – 668. DOI: https://doi.org/10.1109/ICTUS.2017.8286091

 

 Sahith Reddy Madara, Insha Mearaj, Chithirai Pon Selvan, 2017. "Surveillance Governance for Aircrafts with Point Satellite Constellation Matrix Simulation for Collision Detection and Avoidance". International Journal of Innovative Research in Technology, [Online]. Volume 3, Issue 12, 134-151, ISSN 2349-6002, Impact Factor: 5.841. Available at: http://ijirt.org/Issue?volume=3&issue=12&month=May%202017&page=3

 

 Sahith Reddy Madara, Jerrin Thadathil Varghese, Chithirai Pon Selvan, 2017. "Design and Fabrication of Low Cost Open Circuit Subsonic Wind Tunnel". International Journal of Innovative Technology and Research, [Online]. Volume 5, Issue 3, 6154-6161, ISSN 2320-5547, Impact Factor: 4.236, Available at: http://www.ijitr.com/index.php/ojs/issue/current/showToc

 Sahith Reddy Madara, Chithirai Pon Selvan, 2017. "Review of Recent Development in 3-D Printing of Turbine Blades". European Journal of Advances in Engineering and Technology, Volume 4, Issue 7, Available at: http://ejaet.com/theme.php?go=archives

 

 Jerrin Thadathil Varghese, Sahith Reddy Madara, Chithirai Pon Selvan, Dec-31 2017. "Review on the Characteristical behavior of Advanced 3D Spacer Composites". International Journal of Mechanical and Production Engineering Research and Development, (SCOPUS INDEXED), Volume 7, Issue 6, pp. 387-394.

Available at: http://www.tjprc.org/viewarchives.php?keyword=Jerrin+Thadathil+Varghese&jtype=2&from_date=&to_date=&journal=67 , DOI:  https://doi.org/10.24247/ijmperddec201743

 

 Sahith Reddy Madara, Chithirai Pon Selvan, 2017. "A Review of Research and Development in Accelerators of Green Power Generation". International Journal of Scientific & Engineering Research,  Volume 8, Issue 8, pp. 1771-1779, Impact Factor: 4.2. DOI License : https://doi.org/10.14299/ijser.2017.08.003 , Available at: https://www.ijser.org/research-paper-publishing-august-2017_page5.aspx

 

 Sahith Reddy Madara, Sarath Raj N.S, 2017. "Maglev Using Green Aviation Concept in Aviation Industry". Global Journal of Advanced Engineering Technologies, Volume 6, Issue 2, Cosmos Impact Factor: 3.69, pp. 127-136. Available at: http://www.gjaet.com/category/volume-6-issue2/

 

Sahith Reddy Madara, Chithirai Pon Selvan, S. S. Sampath, 2017. "Review of Topical Enlargement in Laser Beam Machining". International Journal of Engineering Research and Modern Education, Volume 2, Issue 2, 6-14, ISSN : 2455 - 4200 , Impact Factor: 6.525, DOI : http://doi.org/10.5281/zenodo.837875 , UOI License : http://u-o-i.org/1.01/07081988-IJERME-/66902401

 

Chithirai Pon Selvan, Sahith Reddy Madara, S. S. Sampath, 2017. "Review of the Current State of Research and Development in Electro Chemical Machining". American International Journal of Research in Science, Technology, Engineering & Mathematics, Volume 1, Issue 19, Impact Factor: 5.01, pp. 14-26. Available at: http://iasir.net/aijrstemissue/aijrstemissue19-1.html

 

 Sahith Reddy Madara, Chithirai Pon Selvan, 2017. "Implementation of Space Based Solar Powered Satellite with Microwave Wireless Power System in Aviation Industry” (Abstract). In a book “Recent Trends in Solar Power Generation and Energy Harvesting”. 1st ed. Dubai, UAE: Amity University and the Centre for Science and Technology of the Non-Aligned and Other Developing Countries (NAM S&T Centre). DOI : https://doi.org/10.13140/RG.2.2.29201.33123

_________________________________________________________________________________________________

 

CURRENT ON-GOING RESEARCH WORK & PUBLICATIONS UNDER REVIEW

Ilias Fernini, Mohammad Rihan, Areej Yousef, Sahith Reddy Madara, Fatima AlAydaroos, "Detection of Jovian Radio Emission at 20.1 MHz with a Decametric Radio Array" (UAE Space Agency  - Funded Project). [Submitted to  International Astronautical Congress (IAC) 2020 in Dubai, UAE]

Sahith Reddy Madara, Ilias Fernini, Mohammad Baker Rihan, Areej Yousef Mustafa, Ridwan Fernini, Fatima AlAydaroos, "Decametric Radio Observations of Jupiter-Io Emission at 20.1 MHz" (UAE Space Agency  - Funded Project). [Submitted to The XXXIII General Assembly and Scientific Symposium (GASS) of the 2020 International Union of Radio Science (Union Radio Scientifique Internationale-URSI) in Italy]

Tarifa AlKaabi, Ibrahim Alsabt, Sahith Reddy Madara, Ilias Fernini, Bogac Karabulut, Alim Rüstem Aslan, Hamid Al Naimiy, "SAASST Ground Station: Satellite Tracking and Control for High Data Rates". [Submitted to  International Astronautical Congress (IAC) 2020 in Dubai, UAE] - Session: Ground Operations - Systems and Solutions (IAF SPACE OPERATIONS SYMPOSIUM)

Sahith Reddy Madara, Ibrahim Alsabt, Tarifa AlKaabi, Ilias Fernini, Bogac Karabulut, Egemen Catal, Onur Öztekin, Hamid Al Naimiy, Alim Rüstem Aslan, "SharjahSat-1 Structural Analysis". [Submitted to  International Astronautical Congress (IAC) 2020 in Dubai, UAE] - Session: Space Structures I - Development and Verification (Space Vehicles and Components) - (IAF MATERIALS AND STRUCTURES SYMPOSIUM)

 

Dr. P.S. Samuel Ratna Kumar, Prof. S. John Alexis, Sahith Reddy Madara, “Tribological study of Aluminium alloy 7075 – Montmorillonite composites” [Submitting to Springer – Transactions of Indian Institute of Metals]

✅  Ibrahim Alsabt, Tarifa AlKaabi, Sahith Reddy Madara, Ilias Fernini, Bogac Karabulut, Egemen Catal, Hakan Telli, Hamid Al Naimiy, Alim Rüstem Aslan, "SharjahSat-1 Thermal Analysis for Orbit-Launch Selection". [Submitted to  International Astronautical Congress (IAC) 2020 in Dubai, UAE] - Session: Space Environmental Effects and Spacecraft Protection - (IAF MATERIALS AND STRUCTURES SYMPOSIUM)

“Application of artificial neural network (ANN) approach for the prediction of surface roughness in wire electrical discharge machining (WEDM) of Inconel 718” - Ongoing Work

  • LinkedIn
  • SGAC_Logo_2018-04-23_FINAL-curvs_rgb-01-
  • Google Scholar
  • YouTube
  • Twitter
  • ResearchGate
  • Instagram
  • photo.jpg